Presets

The Presets page edits Classic mode. There are two tabs, Concentrate and Flower. Each lists five presets plus the Custom value, with a name, temperature and duration, and an active badge on the one in use.

Editing

For each preset you can:

• change its name (up to 11 printable characters; empty goes back to “Preset n”),
• change its temperature and duration,
• make it the active preset,
• reset its name.

A preview ring shows the target on the device’s dial scale.

Changes are sent to the device when you commit them, and the page then shows what the device stored. If the device adjusted your value to stay inside its limits, you are told. The limits are in Classic mode.

Note

The Aeris limits a concentrate session to 60 seconds and 600 °F, so a value that is fine on a Carta 2 may be adjusted there.

Units

The Units toggle switches between °F and °C. It changes what the device displays and what the Focus V app shows. The device keeps both tables, so switching does not lose anything.

Shared with the Focus V app

This is the same table the official app uses, so edits in either show up in the other.

During a session

You cannot edit presets while a session runs. The app says “A session is running”. Some changes made around the end of a session are stored when it ends, and the app tells you.

Bluetooth name

At the bottom of the page you can rename the device, 1 to 15 printable characters. Other apps update their list after they scan again.