Dashboard
The dashboard is the live view of your device. It is the only place a session can be started.
What it shows
Section titled “What it shows”- A dial with the needle at the live temperature and a marker at the setpoint. The colour shifts from cool blue to lime as the coil nears the target, like the Carta 2’s screen.
- A temperature chart of the last ten minutes: live temperature against the setpoint. For a Curve session, the planned curve is drawn behind the measured trace.
- Session state, time left, the stage (in Curve mode), battery, charger, the atomizer type, and the mode and slot.
Starting and stopping
Section titled “Starting and stopping”| Button | What it does |
|---|---|
| Start | Starts a session. You must click it: it never starts by itself after reconnecting. |
| Stop | Stops the session. It is always visible and enabled during a session. |
| Pause and Resume | Pause a running Curve session |
| +10 s | Classic: once per session. Curve: extends the last stage. |
| Quick heat | The factory cleaning heat. A dialog asks you to confirm. See Classic mode. |
| Repeat last | Starts the same session as the previous one |
Start is disabled while an update runs, or while the device says it cannot start (locked out, no atomizer, battery too low). If a session cannot start, the device returns a fault code and the app shows it. It does not retry.
Mode and slot
Section titled “Mode and slot”Switch between Classic and Curve, and choose the active slot: a Classic preset (concentrate or flower) or a curve. You cannot switch mode during a session.
Faults
Section titled “Faults”When the device stops a session with a fault, a banner shows the code and plain advice, using the same titles as the device itself. See Safety and limits for every code.
Battery and charging
Section titled “Battery and charging”The header shows the battery level, whether it is on USB, and when it is charged.
Telemetry and battery use
Section titled “Telemetry and battery use”The app asks the device for updates twice a second on the dashboard. When the tab is hidden, it asks for none, so a background tab does not keep the radio busy.